Most ICs need to be decoupled from their power supply, usually with a 0.1uF capacitor between each power pin and ground. Decoupling is usually used to remove noise and to smooth power fluctuations.

Everyone knows that the perfect capacitor to decouple the power rails around ICs is a 100 nF ceramic capacitor or equivalent, yet where does this ‘fact’ come from and is it even correct? These are the ...

Decoupling capacitors have long been an important aspect of maintaining a clean power source for integrated circuits, but with noise caused by rising clock frequencies, multiple power domains, and ...

Noise management, induced by digital circuits on a p. c. board assembly, deserves the attention of power supply designers and those mastering digital, analog, and mixed-mode application problems ...

The SG-BGA-7199 socket isdesigned for 13.5 x 8 x 1.2mm package size and operates at bandwidths up to 10GHz with less than 1dB of insertion loss. The contact resistance is typically20 milliohms per I/O ...

In “Know the sometimes-surprising interactions in modelling a capacitor-bypass network” (abbreviated to “Know the…” when referred to here), Tamara Schmitz of Intersil and I provided some simulation ...

Greater system complexity and ever-higher clock speeds continue to push IC power consumption to the limit. And though every generation escalates the demand on IC current, voltage levels drop due to ...

The rule of thumb to use a 0.1-µF capacitor on the power pin of a semiconductor device is rapidly fading away. Semiconductor products of today have multiple power pins and voltages. But, it is more ...