Jun 9, 2015 · Zip-ties are used in keeping the twist locks or pins from coming unlocked. These pins and twist locks are adjoined to the chassis and is what secures the container to it.

Jun 9, 2015 · The way some of the chassis pins lock in they will not come out because you don't have have a zip tie on it. But some will I been pulling intermodal for a while so I can kinda look and tell the …

Apr 25, 2020 · Follow that starter trigger wire backwards from starter. You will have to cut open tape and loom. You will only have to go less that 3 feet. I have found the trigger wire broken in this area at …

Mar 21, 2021 · Had a bit of chaffing on a ABS wire on my steer axle, replaced sensor then ran new sensor in wire loom and zip tied it to the air line for front...

Jan 13, 2013 · There are a couple of zip ties at the back to cut too. Then turn the wheels to the left, remove the right side inner fender and you reach the rest of the zip ties and remove the sensor end …

Jan 5, 2010 · NOTE: the RED zip-ties marking polarity. ********** NEXT: hook the NEG cable to the battery post FURTHEST from the truck. ALWAYS hook the NEG cable LAST, or unhook the NEG …

May 18, 2023 · It's on a 2019 vnl860. Lines are in a huge bundle of other lines,cables, etc and I loose track of them. would have to cut open a bunch of zip ties and such to separate and follow them but …

Apr 23, 2014 · I have seen several times the problem is in the harness that they zig-zag all around the frame and spring in that area, then tie down too tightly with a hundred zip ties, then crush it between …

May 21, 2022 · Buy some heater hose and zip ties, and wrap them wherever they can touch as padding. Like this: View attachment 413164 View attachment 413165

Jul 22, 2010 · We find very often the wiring is too light and tied too tightly with too many zip ties that lead to broken connectors and shorted wiring as you mentioned. I would like to see harness runner …